Reply
Member
mfsage
Posts: 3
Registered: ‎05-26-2010
0

8n transmission

I just got done replacing second gear both on the top and bottom shafts. It travels forward with no problems but when high torque is required in reverse the transmission locks up and kills the engine. When I shift forward it moves ahead with no problem. I disassembled the transmission twice to check clearances, etc. and have found nothing. Any advice would be greatly appreciated.

 

Mike

Subject Author Kudos Posted
This is a topic with new unread messages 0 ‎04-17-2013 05:14 PM