Reply
Contributor
Posts: 25
Registered: ‎05-15-2010
0

Re: ag leader on trac 3 fine tuning for planting

Try adjusting your cross track setting. If that doesn't help, go in to the guidance and steering tab, then the wrench next to the Ontrac 3, then adjust steering button, then look for heading gain. Adjust your heading gain (most likely up) and see if that will help any. Ontrac 3 is great and very accurate, however I will say, if your tractor has much play in the gearbox (as 4650's can sometimes have) it takes a lot of adjusting to get it right. If all else fails, try Ag Leader tech support line, 515-232-5363.

Subject Author Kudos Posted
This is a topic with new unread messages 0 ‎05-09-2016 01:30 PM
0 ‎05-13-2016 01:04 PM