cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor

JD 567 baler

I had the net wrap 12v actuator motor go bad, nothing else is wrong.  I wonder if there is a place that has these motors or parts?  JD wants near $900 but, you have to get the whole thing.  Any help/suggestions would sure be appreciated.

0 Kudos
3 Replies
Veteran Advisor

Re: JD 567 baler

Where are you in Nebraska?

There is a good electric motor repair shop in Broken Bow, and one in Grand Island or Kearney.  If you can get just the motor off the baler to them, they may be able to fix it.

If you can't find an electric motor repair shop, I think I should be able to find one for you, if you tell me which town would be closest to you.  As long as the windings aren't burnt, motors are rebuildable. 
No idea on what type of motor JD uses for that, but most 12V motors I have had apart are brush type, and the brushes do wear out eventually.

0 Kudos
Contributor

Re: JD 567 baler

Nebrfarmr,           the magnets (fields) in the barrel are breaking up.  I removed the broken pieces and it works but, I feel there is more doom pending if I don't do something with it.  I'm closer to Grand Island, I'm in southeast Nebraska.    I see Shoup has new actuators but, I didn't see any dimensions close to this one however they are 1/4 the cost of JD.     And thanks for your help, I was stumped.

0 Kudos
Veteran Advisor

Re: JD 567 baler

When it comes to electric motors, and electronics, the two places in GI that I have had good luck with are:

 

http://hesselgesserelectric.com/

 

These guys do electric motors, actuators, etc.  They might be able to find something to fit

 

I don't know if these guys do actuators/motors, but they do about anything else electronic in the ag industry, even fixing monitors, testers, and tractor dash displays

 

http://www.agexpress.com/

 

0 Kudos