cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor

Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution

I recently purchased an 1105 Multi Shift and am adjusting to the handle and tendencies of MF versus John Deere tractors like 4430 and 4440 Quad Range types.  Big difference is in how cumbersome it is to shift to different gears on the 1105.  I changed all fluids, hydraulics, engine and filters.  When i dropped the oil pan for the hydraulics I found 1 lone pin about 1/2" long with a slight groove on one end laying next to the screen filter.  The hydraulic oil much less the filter did not appear to have ever been changed.  There were no other metal parts or shavings of any type found.  Tractor has 2948 hours, appear to be legit.  Met with mechanics and they said it appears to be a part of a cage bearing but no way of telling if it had been worked on or if pin was dropped during assembly.  Every thing on the tractor appears to run great; am familiar with John Deere rear ends that are going out and the shrill, loud noises they make but this tractor makes none of these.  Do notice that it is hard to shift in and out of gear.  At times i take out of gear and into park and when i release clutch the tractor is locked in place but will stall out and die.  If i catch it in time i can press the clutch return shifter back to the gear it came out of and then shift into park and will be ok, is this normal?  Also, many times I will take shifter out of one gear to change gears but cannot go into the next gear; I have to return to previous gear and then I can shift to the gear I want.  This is the only problem i have found, this tractor is awesome, the Perkins sounds like a dream and is very fuel efficient.  Can anyone tell me what they think is going on, is this normal for this series or does it look like problems down the road? 

0 Kudos
5 Replies
Contributor

Re: Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution
Let me reword. New owner of mf 1105, is hard to shift in and out of gear compared to JD quad range. Also drained hyd oil and found pin about cage bearing type, no shavings. Anyone say if shifting is normal for this model and what's with pin?
0 Kudos
Frequent Contributor

Re: Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution

I never had an 1105, but have run one and have owned other MF tractors, so I really don't know what is going on there. I will offer that it is not normal for it to have the shifting problems you describe, especially on a low hour machine. It sounds like it is going into park and a gear at the same time and that should not happen with tight and functioning shifting parts. I think the pin you found is likely to be part of the shifting mechanism, maybe in the shifting rails or forks or the detents that hold it in gear. There is slop there that should not be there and possibly some binding because something is not being held in the right position.  It might last a long time that way, but it should shift nicer than you describe, although they never were a dream to shift.

0 Kudos
Contributor

Re: Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution

I appreciate your response!!  You explained exactly what the tractor does, moves forward but is also in park.  I will keep be vigilante and see if the shifting gets sloppier or if other problems pop up.  Once again thank you!!

0 Kudos
Advisor

Re: Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution

  That's the nature of the beast.  I have an 1135 that operates similar.  Put the multi-power in low when shifting gears, leaving it in high locks it in gear.  That's why you put multi-power in hi for engine braking.  And don't use park unless absolutely necessary.  Here in Ohio flatlands I rarely use park.

0 Kudos
Contributor

Re: Massey Ferguson Tractor Veterans (MF 1105 Multi Shift)

Jump to solution
Thank you men, getting along fine with tractor. Do agree cumbersome is part of it.
0 Kudos