Frequent Reader
Posts: 3
Registered: ‎07-08-2010

Re: Trimble Guidance Issues

It is a an acceptable mounting position to have the cables down as long as the black cover is facing forward and the base is exactly at right angles to the centerline of the vehicle.  (it can be off the centerline but must be set at right angles. the back wall of the tractor is the only good place for the mounting if the cables are facing down.  try a little free play. make sure all the measurements are entered correctly in the setup. make sure you have the correct tractor type selected. check every setup parameter to make sure they are correctly entered.  It probably is some simple setup item that needs tweaking.